| [Image: Hinged Panel Diagram] |
|
| [Image: Braced panel over a large span] |
Hinged Panel
Tips on panel installation
- Install a panel so floodwater pushes the panel into its frame more tightly. Install the frame on the water side of the supports so water pressure doesn't try to unseat it.
- Use latches or screws to hold panels in place. Latches and thumbscrews that don't require tools are preferable.
- Use gasket material in the frame or on the panel. The gasket on a stored panel may last longer than one mounted in the frame and continuously exposed to the weather.
For large spans, stiffen and brace the panel from behind.
Return to Using Panels as Closures for Flood Protection